Productos de Shenzhen Fulianda Heater Co.,Ltd.

Silicone Rubber Heater

Silicone heater is a thin film heater(imported material standard thickness of 1.5mm, domestic standard thickness of 1.7mm),It has a very good softness.It can be completely in close contact with the object being heated.This will allow the heat to be delivered to any desired place.Easy to use, easy to operate. Silicone rubber heating film temperature range is low temperature -60 ?, high temperature between 230 ?.The voltage can be customized according to the user's requirements.The heating core has two kinds of high resistance gold wire and metal foil,Metal foil made of electric heating core can make the heating sheet to withstand high power density, with excellent fast heating function.Resistance wire heating element recommended maximum power density <3W / cm2.Etching foil heating body recommended maximum power density <4W / cm2

Drum Heater/Barrel Heater/Bucket Heater

drum heater is a flexible silicone heating band.It can be used for tank, pipe, and other barrels of equipment heating, heating and insulation, by heating the barrel of liquid (glue,oils, asphalt, paint, paraffin, oil and various resin raw materials)So that its viscosity decreased,enhance its mobility.This device is immune to seasonal use.It can be used for wet?no explosive gas atmospheres?Industrial equipment or laboratory and other environments.But do not use long-term immersion in water or oil to prevent short circuit.In addition, we installed the sensor on the surface of the heater, through the temperature controller directly control the temperature. (We aslo can install digital controller)

Kapton Heater/Polyimide Heater/PI Heater

Compared with the traditional electric heating element, the metal electric film has the following advantages: ?The occupying space is small; very light weight; very thin thickness ?Very soft, the minimum bending radius of only 0.8mm or so. ?Shape and size is extremely flexible, especially suitable for making a very small area of flexible electric film components. ?Using surface heating, the surface power density of up to 7.8 W / cm2. Therefore, this product line has the characteristics of better heating performance, faster heating rate. ?Thermal inertia is small, temperature control is flexible, temperature error <2% ?The insulating film as a protective layer has a very low saturated vapor pressure, and has a very low gas release property, and has excellent chemical resistance, antibacterial property and radiation resistance. Therefore, the electric film series of products for vacuum environment, and oil and most chemicals (such as acidic, chemical solvents, general lye) in contact with the environment. ?This series of products safe, reliable, long service life. Easy to install, can be double-sided adhesive paste can also be mechanically fixed on the heating body.

Thick Heater/Stainless steel Heater

Thick heater is a new heating device which uses thick film screen printing process to print insulation materials, heating resistors, conductors, glass protective glazes and so on on stainless steel substrate. High safety factor, stable performance, pure resistance heating, no electromagnetic radiation, and has far infrared function. Energy saving and environmental protection, high heat transfer efficiency (=98%), uniform heating. Compatible with strong adaptability, small size, easy installation, AC and DC (high and low voltage) electricity can be started, can successfully replace traditional heating products